ارزیابی پتانسیل زمین تا توسعه صنعتی با ترکیب تکنیکهای مکانی و تصمیم گیری (مطالعه موردی ، استان کردستان)

نوع مقاله : مقاله پژوهشی

نویسندگان

1 دانشگاه تهران-دانشکده تحصیلات تکمیلی محیط زیست

2 university of tehran

چکیده

In this research, we are present a GIS-based multi-criteria decision analysis approach to evaluating the suitability for industry site selection in the Kurdistan province in Iran. The multi-criteria decision approach considers different criteria which are standardized by fuzzy membership functions and combined by integration of fuzzy analytical hierarchy process (FAHP) and weighted linear combination techniques. The FAHP is used for the elicitation of attribute weights while WLC method weighting layers by use of obtained weights from FAHP and multiply in constraint elements. In preparation the restriction map, we combine different constraint element by union analyst. We used of increase and decreased linear-fuzzy functions to standardization the layers, and the Gamma operator is used for the overlaying these layers. We used of three levels of gamma operator for overlaying the layers, and we compare the three result map, then we recognized that the 0.5 of gamma operator is rational and optimum.in the final stage by overlaying gamma0.5 result map with restriction map we distinguished the suitable place for industry in Kurdistan province. As a result, 0.024 percent of total province area has the best potential to industrialization.

کلیدواژه‌ها


عنوان مقاله [English]

Land potential evaluation to Industrial development with combination the spatial and decision-making techniques (Case study, Kurdistan province)

نویسندگان [English]

  • jahanbakhsh balist 1
  • faeze chehrazar 2
  • Mohammad javad Amiri 2
1 university of tehran-faculty of environment
2 university of tehran
چکیده [English]

In this research, we are present a GIS-based multi-criteria decision analysis approach to evaluating the suitability for industry site selection in the Kurdistan province in Iran. The multi-criteria decision approach considers different criteria which are standardized by fuzzy membership functions and combined by integration of fuzzy analytical hierarchy process (FAHP) and weighted linear combination techniques. The FAHP is used for the elicitation of attribute weights while WLC method weighting layers by use of obtained weights from FAHP and multiply in constraint elements. In preparation the restriction map, we combine different constraint element by union analyst. We used of increase and decreased linear-fuzzy functions to standardization the layers, and the Gamma operator is used for the overlaying these layers. We used of three levels of gamma operator for overlaying the layers, and we compare the three result map, then we recognized that the 0.5 of gamma operator is rational and optimum.in the final stage by overlaying gamma0.5 result map with restriction map we distinguished the suitable place for industry in Kurdistan province. As a result, 0.024 percent of total province area has the best potential to industrialization.

کلیدواژه‌ها [English]

  • industry site selection
  • GIS
  • WLC
  • Fuzzy logic
  • Kurdistan province
Aleksandar Rikalovic, Ilija Cosic, and Djordje Lazarevic, 2013, GIS-Based Multi-Criteria Analysis for Industrial Site Selection, 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013, Procedia Engineering 69 (2014) 1054 – 1063. 
Amanda Briney, ESRI. (n.d.). “Using Raster Data for Site Selection.” ESRI Virtual Campus. Personal Notes. (Course Taken 2 April 2014).
Arentz T.A., Borgers A.W., and Timmermans H.J., “An efficient search strategy for site selection decisions in an expert system," Geographical Analysis, vol. 28, pp. 126-146, 1996.
Arentz T., Borgers A., and Timmermans H., "A Knowledge-based system for developing retail location strategies," Computers, Environment and Urban Systems, vol. 24, pp. 489-508, 2000.
Bailey, David, Goonetilleke, Ashantha and Campbell, Duncan. (2003), A new fuzzy multi-criteria evaluation method for group site selection in GIS. Journal of Multi-Criteria Decision Analysis 12(6): pp. 1-11
Beheshti far,sara.,mesgari.m.s., voldan ,z,m,j.,and karimi.m. using of fuzzy logic in GIS environment in order to gas power plant site selection, Journal of Civil and Surveying Engineering - Faculty of Engineering, Volume 44, Number 4, pages 583 to 595, January 1389(2008).
Boroushaki S., and Malczewski, J. "Implementing an extension of the analytical hierarchy process using ordered weighted averaging operators with fuzzy quantifiers in ArcGIS," Computers & Geosciences, vol. 34, no. 4, pp. 399-410, 2008.
Carver S. J. (1991). Integrated multi-criteria evaluation with geographical information systems, International Journal Geographical Information Systems, 5(3), pp. 321–339.
Deng, H., 1999. Multicriteria analysis with fuzzy pairwise comparisons. International Journal of Approximate Reasoning 21, 215–231.
Department of environment ministry of natural resources and environment MALAYSIA, guidelines for siting and zoning of industry and residential areas,(2012), Second Revised Edition, October 2012.
Eldin N., Eldrandaly K. "A Computer-Aided Decision-Making System for Siting Capital Investment Projects," ASCAAD's first International Conference on Computer Aided Architectural Design, KFUPM, Saudi Arabia, pp. 3-12, 2005.
Eldrandaly K., Eldin N., and Sui D. "A COMbased Spatial Decision Support System for Industrial Site Selection," JGIDA. Vol. 7, no. 2, pp. 72-92, 2003.
Eldrandaly K., Eldin N., Sui D, Shouman M., and Nawara G. "Integrating GIS and MCDM Using COM Technology," The International Arab Journal of Information Technology, vol. 2, no. 2, pp. 163-168, 2005.
Eastman J. R. (1997). Idrisi for Windows, Version 2.0: Tutorial Exercises, Graduate School of Geography – Clark University, Worcester, MA.
Eastman J. R. (2006). Idrisi Andes – Tutorial, Clark Labs., Clark University, Worcester, MA.
E. H. Ibrahim S. E. Mohamed A. A. Atwan, (2011), Combining fuzzy analytic hierarchy process and GIS to select the best location for a wastewater lift station in ELMAHALLA EL-KUBRA, NORTH EGYPT, International Journal of Engineering & Technology IJET-IJENS Vol: 11 No: 05
Feng, C., 1995. Fuzzy multicriteria decision making in the distribution of factories: an application of approximate reasoning. Fuzzy Sets and Systems 71, 197–205.
Findikaki I., "SISES: An Expert System for Site Selection," In M. L. Maher and C. N. Kosten, "Proceedings of a Symposium of the American Society of Civil Engineers," Expert Systems in Civil Engineering, pp. 182-192, 1986.
Graciela Metternicht and Daavid Malins, (2005), fuzzy modeling of dry land salinity hazard in Western Australia, 160-170 pn
Graeme f. Bonham-carter, 2006, geographic information systems for geoscience.modelling with gis.298pn
S. Zandsalimi, N. Karimi, A. Kohandel, Arsenic in the soil, vegetation and water of a contaminated region, Int. J. Environ. Sci. Tech., 8 (2), 331-338, Spring 2011.
Hamid Ebadi, Roozbeh Shad, Mohamad Javad Valadanzoej, Alireza Vafaeinezhad, Evaluation of Indexing Overlay, Fuzzy Logic and Genetic Algorithm Methods for Industrial Estates Site Selection in GIS Environment, Commission V, WG V/2
Han S.Y., and Kim T.J., "ESSAS: The Expert System for Site Analysis and Selection," In Kim T.J., Wiggins L.L., and Wright J.R. (Eds.), Expert Systems: Applications to Urban Planning, pp. 145-158, Springer-Verlag, Berlin, 1990.
Jun C. Incorporating decision preferences into an expert geographic information system for industrial site selection. Ph.D. Dissertation, Texas A&M University, College Station, USA, 1997.
Jeganathan, C., 2003. Development of Fuzzy Logic Architecture to Access the Sustainability of the Forest Management. MSc. Thesis. Enschede, ITC: 126.
Kates S. Retail site selection using GIS and MCDM: A case study of the Toronto retail jewelry industry. M.A. Thesis, University of Western Ontario, London, Ontario, Canada, 1997.
Keeney R.L., Siting Energy Facilities, Academic Press, New York, 1980.
Lee, A.H.I., Chen, W.C., Chang, C.J., 2008. A fuzzy AHP and BSC approach for evaluating the performance of the IT department in the manufacturing industry in Taiwan. Expert Systems with Applications 34, 96–107.
 Lou, X., and Dimitrakopoulos, R., 2003, Data-driven fuzzy analysis in quantitative mineral assessment: Computers and Geosciences, v. 29, p. 3-13
Mikhailov, L., Tsvetinov, P., 2004. Evaluation of services using a fuzzy analytic hierarchy process. Applied Soft Computing 5, 23–33.
Masters, Timothy, 1993, Practical neural network recipes in C++: New York, Academic Press, p. 285.
Tsoukalas, L.H., and Uhrig, R.E., 1997, Fuzzy and neural approaches in engineering: New York, John Wil
ey and Sons, Inc., 587 p.
Mak S. "Identify sites for Accommodating Open Storage Uses: A GIS Modeling Approach," Esri International User Conference, 1999. http://proceedings.esri.com/library/userconf/proc 99/proceed/papers/pap168/p168.html
Mohamad A. Al-Amri and Khalid A. eldrandaly, 2009, a proposed GIS-based decision-making framework for tourism development site selection, The International Arab Conference on Information Technology (ACIT),
Mehdi ziaie, Fatemeh hajizadeh, Seid said Reza ahmadizadeh, Komeil jahanifar, A Combined Model of GIS and Fuzzy Multi-Criteria Decision Analysis (FMCDA) for Suitable Evaluation/Selection of Industrial Areas, (Birjand, Iran), Recent Researches in Environmental Science and Landscaping
Nazli Yonca Aydin, Elcin Kentel H. Sebnem Duzgun, 2013, GIS-based site selection methodology for hybrid renewable energy systems: A case study from western Turkey, Energy Conversion and Management 70 (2013) 90–106(2013).
 Rouhani S., and Kangari R., "Landfill Site Selection: A Microcomputer Expert System," In Kim T.J., Wiggins L.L., and Wright J.R. (Eds.), Expert Systems: Applications to Urban Planning, pp. 157-169, Springer-Verlag, Berlin, 1990.
Rao M., S. V. C. Sastry, P. D. Yadar, K. Kharod, S. K. Pathan, P. S. Dhinwa, K. L. Majumdar, D. S. Kumar (1991). A Weighted Index Model for Urban Suitability Assessment – A GIS Approach. Bombay Metropolitan Regional Development Authority, Bombay.
Ruiz Puente, C., Diego, M., Ortiz, J., Hernando, M., Hernaez, P. 2007. The Development of a New Methodology Based on GIS and Fuzzy Logic to Locate Sustainable Industrial Areas. 10th AGILE International Conference on Geographic Information Science. Aalborg University. Denmark.
Suh S., Kim M.P., and Kim T.J., "ESMAN: An Expert System for Manufacturing Site Selection," Computers, Environment, and Urban Systems, vol. 12, pp. 239-252, 1988.
Siddiqui M., Everett J., and Vieux B. "Landfill Siting using Geographic Information Systems: A Demonstration," Journal of Environmental Engineering, vol. 122, pp. 515- 523, 1996.
Tsoukalas, L.H., and Uhrig, R.E., 1997, Fuzzy and neural approaches in engineering: New York, John Wiley and Sons, Inc., 587p.
VahidniaH., Alesheikh A., and Alimohammadi A. "Hospital site selection using fuzzy AHP and its derivatives," Journal of Environmental Management. Vol. 90, no. 10, pp. 3048-3056, 2009.
Williams E. A., and Massa A. K., Siting of Major Facilities: A Practical Approach, McGraw- Hill Inc, New York, 1983.
Witlox F., and Timmermans H., “MATISSES: A Knowledge-Based System for Industrial Site Selection and Evaluation," Computers, Environment, and Urban Systems, vol. 24, pp. 23-43, 2000.
Zadeh, L.A. A computational approach to fuzzy quantifiers in natural languages: Computers and Mathematics, v.9, p. 149-184.